New Machine Build- Spindle Tool Change Idea(QTC)

[HAO MAU]

Hi!

Such Tool the change way can realize. I already produced set of QTC. to ask that has the human to be willing to attempt?


jimmy



24 hours for engineers discussing:

MSN:a0937409596@yahoo.com.tw
skype:dearatron

www.atron.com.tw

[HAO MAU]

Hi ! everbady!

My design idea is made according to the requirements of TORMACH.Please leave me your precious opinion about my design.

jimmy



24 hours for engineers discussing:

MSN:a0937409596@yahoo.com.tw
skype:dearatron

[SlowRiderr]

Originally Posted by HAO MAU Hi! Such Tool the change way can realize. I already produced set of QTC. to ask that has the human to be willing to attempt? jimmy 24 hours for engineers discussing: MSN:a0937409596@yahoo.com.tw skype:dearatron www.atron.com.tw

What the heck are you trying to say? Are you using some sort of language translator? You are copying a design by Hoss and Tormach and I do not see anything innovative.

[ihavenofish]

Originally Posted by SlowRiderr What the heck are you trying to say? Are you using some sort of language translator? You are copying a design by Hoss and Tormach and I do not see anything innovative.

sigh.

i dont think hoss has much to copy, since he generally copied someone else.

but thats irrelevant, i have to agree jimmy's post is very confusing. no need to be abrasive though

i *think* he is asking for input and ideas on how to best implement a tool changer to go with his modified quick change tooling.

the drawing shows a tray, which i assume would mount on the table. thats probably the most basic way of getting it done with a small amount of tools.

i think he might be posting in the wrong forum area as well. the tooling is geared primarily to R8 spindle, which would be best discussed in the benchtop forums.

[mactec54]

Hi Guys

If you check he has not copied anyone's design but from the Tiawanese,They have/hold the patent for this design, They also have a hard plastic/rubber that fits in the grove in the top of the holder that pushes up against the spindle this works better than the metal to metal that they are using here

If you look at his drawings you will see the recess in the flange, that get's pushed up against the spindle, this is were the plastic/rubber insert is put

They have them for Cat30 & Cat40 as well

[HAO MAU]

Originally Posted by mactec54 Hi Guys If you check he has not copied anyone's design but from the Tiawanese,They have/hold the patent for this design, They also have a hard plastic/rubber that fits in the grove in the top of the holder that pushes up against the spindle this works better than the metal to metal that they are using here If you look at his drawings you will see the recess in the flange, that get's pushed up against the spindle, this is were the plastic/rubber insert is put They have them for Cat30 & Cat40 as well

There are many simlar products in the market. We manufacture the product for the popular good in the market, becasue we collect many good ideas from the hobbist. For this auto tool change, it is not conception from myself. We design it form many hobbist's thread. We assemble all information for finally perfect product and hope you would like it.


jimmy


www.atron.com.tw

[heilcnc]

HAO MAU these are good looking machines is there anything that we could make on
these machines that we could export to you?

[HAO MAU]

Originally Posted by heilcnc HAO MAU these are good looking machines is there anything that we could make on these machines that we could export to you?

Hi ! heilcnc

We advice you could export some products which are like controller PCB to us or auto tool change design to us. You could make the money by knowledge in America and we could make the money by labour. We trust it a game rule.


jimmy


www.atron.com.tw