Need Help!- Belt material question?

[satguy]

I can get XL size rubber belts locally fairly cheaply. However Im wondering if this a good timing belt material to use.
I need something that can last at least 3-5 years.
The pulley is used to driver a linear rail approx (500mm long) left and right. The rail has a load of approx 22-30 pounds on it.
The pulleys are small 15 teeth XL pulleys.

Will rubber degrade over time causing it to break? is polyurethane (PU) material better to use?

Will rubber stretch more over time than other materials?

i really cant find much info on this? can someone please show me the light.
What would you experts reccomend for my application.

thanks you

[satguy]

can someone at least point me to where to start reading about belt types

[Jason Marsha]

Originally Posted by satguy can someone at least point me to where to start reading about belt types

Try this link

http://www.sdp-si.com/D265/HTML/D265T010.html

use the arrows to see the other pages

[garagefela]

Have a look here, but be warned the amount of info in here is mind numbing.

http://brecoflex.com/


Cheers M

[satguy]

Originally Posted by Jason Marsha Try this link http://www.sdp-si.com/D265/HTML/D265T010.html use the arrows to see the other pages

thanks mate. i looked on that website but didnt see that link. its exactly what i was after.