Chinese Spindle Experiences - Page 3 - CNCzone.com-The Largest Machinist Community on the net!

Pplug · #25 06-11-2009, 09:01 AM

I rewired the submersable pump last weekend. I took out the 1/2" diameter tube and replaced it with 3/16". I get better flow and now the spindle dose not clog. My next project is to try the smaller pump I have and seal the reservoir.

I'm also thinking of getting another spindle for a moving table router I made to replace an hitachi router.

emilcnc · #26 08-20-2009, 05:01 AM

Hi,
Do you know the name of spindle producer ( 1.5 and 2.2 KW versions ) - link to site ? Any name of it ?

Regards

Emil

Cncdemon · #27 12-01-2009, 07:07 PM

I've ordered a spindle from a chinese company...Kinkda. Has anyone here heard anything about this company. The quality of their spindles and whether they are a reputable company. I'm about to finalize the order and would like to get some feed back first.

Thanks

yngndrw · #28 12-02-2009, 05:37 AM

Originally Posted by emilcnc

Do you know the name of spindle producer ( 1.5 and 2.2 KW versions ) - link to site ? Any name of it ?

I bought mine from this Ebay store: http://stores.shop.ebay.co.uk/love-h...__W0QQ_armrsZ1

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cheap 1500W Chinese spindle, experiences?	matth	DIY-CNC Router Table Machines	1249	05-28-2012 12:47 PM
CHINESE SPINDLE 2.2KW	Ed Williams	Open Source CNC Machine Designs	65	04-26-2012 01:01 PM
Water cooled Chinese Spindle - air leak	analogman	DIY-CNC Router Table Machines	14	03-02-2010 03:22 PM
Chinese Spindle - which control board?	analogman	DIY-CNC Router Table Machines	3	05-17-2009 12:34 PM
Need Help!- 2200 watt chinese spindle settings ebay	Ed Williams	DIY-CNC Router Table Machines	1	05-05-2009 06:45 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)