| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
02-10-2009, 03:12 PM
| |||
| |||
Hi I have recently built a 5ft square 3 axis CNC router, incorporating a gantry, stepper motors, EMC, and trapezoidal lead screws. All works reasonably well except the fastest speed I can reach on the x and y axis is 15mm per second. This seems a little slow. Can anyone tell me what kind of speeds similar sixed machine run at. Thanks Aaron  |
|
#2
02-10-2009, 05:29 PM
| ||||
| ||||
| You're going to have to provide some info on about your machine. Motors, power supply, weight, screw lead.....
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem- Slow Speed Stalling? | bigz1 | Stepper Motors and Drives | 2 | 04-20-2008 02:15 PM |
| Help. Slow speed | shamus13 | Mach Mill | 2 | 12-08-2007 11:06 AM |
| Micro torque converter to slow router speed | technomage | DIY-CNC Router Table Machines | 1 | 10-17-2007 09:52 PM |
| Slow down the pneumatic actuator speed | Syphonics | Mechanical Calculations/Engineering Design | 3 | 12-21-2006 10:21 AM |
| Cut speed is stuck at Slow????Mach 2 | mwalach | Mach Mill | 3 | 08-24-2006 06:58 AM |
| | |
Linear Mode
