Need Help!- Don't know what post processor to use

[Mattgus]

Hello, I'm pretty new to this cnc routing/plasma, but i have built my own table (2,3 x 1,6 meter) and i'm using Corel x3, Sheetcam, mach3. but i'm not sure what post processor to use when i'm routing/engraving and post from sheetcam to mach, please can anyone help me..
Ps. i also having trouble to use plasma on this table, my hf-start on the plasma causes mach3 to trig emergence button input.

[Mattgus]

Really no one that know???

[audioandy1762]

Hi

If you look on the Mach website it states " use a standard Fanuc post processor" for Sheetcam, sorry I cannot help with your other problem but I'm sure someone will be along and help out.

Andy

[LeeWay]

I have always used the Mach 2 processor in Sheetcam.
I did modify it some to have it go back to start when done, but it works pretty well on a router and mill.

I did start building a plasma cutter, but never finished it. Don't think I will at this point. You can try setting a larger debounce on it. That might help.