| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
01-09-2009, 07:50 PM
| |||
| |||
Hi - I am unsure how to connect my vacuum hose to my z-axis so I do not have to hold it and follow the router all the time. Attached are pictures of my setup and would appreciate some advice on how to mount my vacuum hose. Many thanks in advance. SS
__________________ Please check out my CNC blog http://cncinside.com  |
|
#2
01-09-2009, 09:23 PM
| |||
| |||
| Try using a Vaccum Shroud as shown:  That's a nice setup, it collects most of the dust. The only thing is that you won't be able to see the cutter bit in action!!! |
|
#3
01-10-2009, 01:25 AM
| |||
| |||
| I made something like felix's but I used acrylic for the top so I could see what was going on with the bit. Gary |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Vacuum table and vacuum pump | garagefela | DIY-CNC Router Table Machines | 19 | 01-25-2012 10:30 AM |
| help needed to build vacuum mat. | erkiwi | Hobby Discussion | 2 | 11-08-2007 07:50 PM |
| How much vacuum? | nbuchholz | Open Source CNC Machine Designs | 4 | 05-25-2006 04:46 PM |
| Vacuum system | JPMach | Work Fixtures and Hold-Down Solutions | 8 | 01-31-2006 01:07 AM |
| Vacuum pump/blower conversion needed | Al_The_Man | DIY-CNC Router Table Machines | 10 | 01-16-2005 08:46 PM |
| | |
Linear Mode
