G-code help

[nikbrewer]

i am finishing my 80/20 cnc this month. I hope to use my software at work to spit out g-code for my cnc. its a post for a multicam 5000. i know i will need to deleate a few lines, not sure what.

i plan on having about a 24" x 48" cutting area.

here is a sample code

N1 M90
N2 G90
N3 G75
N4 //(ROUTING SEQUENCE)
N5 G97 S15500
N6 G00 T6
N7 G00 Z-25.4
N8 G00 X716.74 Y-248.16
N9 M12
N10 G00 Z-2.54
N11 G01 Z9.78 F31.75
N12 G42
N13 G02 X769.19 Y-271.45 I739.19 J-268.29 F317.5
N14 G01 X741.90 Y-530.71 F317.5
N15 G02 X730.85 Y-540.66 I730.85 J-529.55 F317.5
N16 G01 X57.15 Y-540.66 F317.5
N17 G02 X20.64 Y-504.15 I57.15 J-504.15 F317.5
N18 G01 X20.64 Y-440.65 F317.5
N19 G03 X19.05 Y-439.06 I19.05 J-440.65 F317.5
N20 G02 X7.94 Y-427.95 I19.05 J-427.95 F317.5
N21 G01 X7.94 Y-199.35 F317.5
N22 G02 X19.05 Y-188.24 I19.05 J-199.35 F317.5
N23 G01 X44.45 Y-188.24 F317.5
N24 G03 X46.04 Y-186.65 I44.45 J-186.65 F317.5
N25 G01 X46.04 Y-135.85 F317.5
N26 G03 X44.45 Y-134.26 I44.45 J-135.85 F317.5
N27 G01 X19.05 Y-134.26 F317.5
N28 G02 X7.94 Y-123.15 I19.05 J-123.15 F317.5
N29 G01 X7.94 Y-40.88 F317.5
N30 G02 X25.40 Y-23.42 I25.40 J-40.88 F317.5
N31 G01 X124.65 Y-23.42 F317.5
N32 G02 X142.10 Y-40.24 I124.65 J-40.88 F317.5
N33 G03 X716.74 Y-248.16 I471.40 J-28.18 F317.5
N34 G40
N35 G00 Z-25.4
N36 G00 X716.74 Y-248.16
N37 M12
N38 G00 Z-2.54
N39 G01 Z19.56 F31.75
N40 G42
N41 G02 X769.19 Y-271.45 I739.19 J-268.29 F317.5
N42 G01 X741.90 Y-530.71 F317.5
N43 G02 X730.85 Y-540.66 I730.85 J-529.55 F317.5
N44 G01 X57.15 Y-540.66 F317.5
N45 G02 X20.64 Y-504.15 I57.15 J-504.15 F317.5
N46 G01 X20.64 Y-440.65 F317.5
N47 G03 X19.05 Y-439.06 I19.05 J-440.65 F317.5
N48 G02 X7.94 Y-427.95 I19.05 J-427.95 F317.5
N49 G01 X7.94 Y-199.35 F317.5
N50 G02 X19.05 Y-188.24 I19.05 J-199.35 F317.5
N51 G01 X44.45 Y-188.24 F317.5
N52 G03 X46.04 Y-186.65 I44.45 J-186.65 F317.5
N53 G01 X46.04 Y-135.85 F317.5
N54 G03 X44.45 Y-134.26 I44.45 J-135.85 F317.5
N55 G01 X19.05 Y-134.26 F317.5
N56 G02 X7.94 Y-123.15 I19.05 J-123.15 F317.5
N57 G01 X7.94 Y-40.88 F317.5
N58 G02 X25.40 Y-23.42 I25.40 J-40.88 F317.5
N59 G01 X124.65 Y-23.42 F317.5
N60 G02 X142.10 Y-40.24 I124.65 J-40.88 F317.5
N61 G03 X716.74 Y-248.16 I471.40 J-28.18 F317.5
N62 G40
N63 G00 Z-25.4
N64 G00 X737.06 Y-266.38
N65 M12
N66 G00 Z-2.54
N67 G01 Z9.78 F31.75
N68 G41
N69 G02 X742.04 Y-268.59 I739.19 J-268.29 F317.5
N70 G01 X716.27 Y-513.36 F317.5
N71 G01 X57.15 Y-513.36 F317.5
N72 G02 X47.94 Y-504.15 I57.15 J-504.15 F317.5
N73 G01 X47.94 Y-440.65 F317.5
N74 G03 X35.24 Y-416.72 I19.05 J-440.65 F317.5
N75 G01 X35.24 Y-215.54 F317.5
N76 G01 X44.45 Y-215.54 F317.5
N77 G03 X73.34 Y-186.65 I44.45 J-186.65 F317.5
N78 G01 X73.34 Y-135.85 F317.5
N79 G03 X44.45 Y-106.96 I44.45 J-135.85 F317.5
N80 G01 X35.24 Y-106.96 F317.5
N81 G01 X35.24 Y-50.72 F317.5
N82 G01 X115.29 Y-50.72 F317.5
N83 G03 X737.06 Y-266.38 I471.40 J-28.18 F317.5
N84 G40
N85 G00 Z-25.4
N86 G00 X737.06 Y-266.38
N87 M12
N88 G00 Z-2.54
N89 G01 Z19.56 F31.75
N90 G41
N91 G02 X742.04 Y-268.59 I739.19 J-268.29 F317.5
N92 G01 X716.27 Y-513.36 F317.5
N93 G01 X57.15 Y-513.36 F317.5
N94 G02 X47.94 Y-504.15 I57.15 J-504.15 F317.5
N95 G01 X47.94 Y-440.65 F317.5
N96 G03 X35.24 Y-416.72 I19.05 J-440.65 F317.5
N97 G01 X35.24 Y-215.54 F317.5
N98 G01 X44.45 Y-215.54 F317.5
N99 G03 X73.34 Y-186.65 I44.45 J-186.65 F317.5
N100 G01 X73.34 Y-135.85 F317.5
N101 G03 X44.45 Y-106.96 I44.45 J-135.85 F317.5
N102 G01 X35.24 Y-106.96 F317.5
N103 G01 X35.24 Y-50.72 F317.5
N104 G01 X115.29 Y-50.72 F317.5
N105 G03 X737.06 Y-266.38 I471.40 J-28.18 F317.5
N106 G40
N107 G00 Z-25.4
N108 M22
N109 G98 P147 D1
N110 M02


i know i need to get rig of the t6 line, thats tool 6, but what else do i need to deleate? i plan on using mach 3