Any one want my half finished CNC? In Oklahoma

[nikbrewer]

Well, My CNC plans have changed. I started building my machine for a hobby, but now i need somethign slightly bigger that can cut a little bit faster.

My machine is based off the Solsylva 24" x 48" rack and pinion machine. I will also include the build manual i bought.

here is the facts.

Built from laminated baltic birch ( think 1 1/2" thick glue lam).

table it slef probally weights 150 lbs, so this is a heavy duty base.

uses 1 5/16" chrome rod for slides, wall thickness is over 1/2" thick.

What it comes with

table
gantry
racks
pinions
pullys, belts, bearings
36" x 1/2" acme lead screw w/ nut
drill rod for axle
lots of other parts
2 18" linear slides w/ 4 carts

i am switching over 2 80/20 machine.

If interested, respond of pm me

here are some pics

(no electronics are included)

im just trying to free up room for my new machine and get back a little of what i have n these parts. Iwill also part out if anyone is interested

[Fixittt]

I dont need the machine but I am interested in getting together with other oklahoma CNCers
I live close to tulsa. where you at?

[nikbrewer]

Im in edmond. Are you sure you dont need it? What are you running right now?

[Fixittt]

right now I run 2 small desktop cnc mills and mainly all I cut is wax models for jewelry. Plus I dont have a space large enough for something that big.

[nikbrewer]

too bad. i would love to ge totgether some time. My new machine should cut i am guessing 54" x 32"

[sonex128]

Fixittt

Where are you located? I am between Claremore and Owasso. I am not a CNC'er yet but have everything to build one. Would be nice to talk to someone local that is interested in CNC. My wife is tired of hearing me talk about it.

Brian

[nikbrewer]

MINE TOO!!, im in edmond, just north of okc. if you are needing any parts, ill probally stril my cnc for parts in the next week or 2