Need Help!- old pop up ad for "plain" router motor ?

[jethro]

Hi all- I was here browseing about 6-7 months ago when I started
concieving my home brew duplicator design. I remember seing a pop-up
style ad for a simple looking router motor which had no stuff attached
to the outer case, it just looked like an aluminum cylinder with a collet
comming out of one end. Can someone remember the link or whatever
there was on how to find that again ? I have no idea how to word a
search for that particular thing !
Any help would be joyiously accepted !

Tim

[ger21]

This?

http://www.homeshopcnc.com/HFspindle.html

[jethro]

Ger21....
Thanks for the reply ....
No that wasn't it... maybe I can explain what it was a little better.
Immagine taking a common wood router or laminate trimmer and removing
all the outside parts off of it right down to the motor housing. That's
what this was, an alternative to buying a commercial one and stripping
it down. I think it was under 50$ . I liked it because it had an outside
case just like a cylinder , I could design a tube with a slit in the side that
could form a clamp/socket to hold it rigidly and be able to slide up and down
when the clamp was "open". ( like a collet made from a tube ) Most of the
commercial routers have bulges and things on the ends.
Does anyone remember this ???????
Just a basic router that you could build arround.

Tim

[Switcher]

I think most brands make that?

Like this?

http://www.homedepot.com/webapp/wcs/...3+90401+527284


.