G-Codes

[mocnc]

Ok, please bare with me, I have been a member here for some time, and I posted a few times in the past.....but, lately for the last year and a half I had a serouis situation in my life. I almost left this wonderful world. So needless to say my cnc was on the back burner. But its time for me to come back and finish my own cnc and get back on track. Strange as it sounds, but this project of mine actually makes me smile. I love working with my hands and building things and watch them work. After all I was a because kid and had to know everything. So to everyone that is here, its because of your kindness that makes this a great place to come and visit. THANK YOU ALL!! Now that the sappy stuff is out of the way, lets get back to what I want to say. I looked high and low on this msg board, and maybe I am blind as a bat. But there is no actual spot that only has g-codes. There is a section that has G-codes programming, but not just g-codes. Guess what I am asking is wouldn't it be nice to have a section, just for g-codes. A place where ppl can post there g-codes to make certain projects. They can post a pic with it and a breif description or instructions. What do you all think??? Or am I way out there and just a dreamer on this one?

[ger21]

Sharing g-code can cause problems, as code that runs fine on one machine mayn ot run correctly on another.

If you can create your own code from a .dxf, there are hundreds of .dxf files in this thread.

http://www.cnczone.com/forums/showthread.php?t=19346

[Boots]

The practice of sharing G-Code (Like Gerry says) can cause crashes and even death to those who might download it and just try it without proof reading it. These are, after all, just Robotic Machines that do what they are told, if they can, crash or not.