| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
09-02-2004, 09:01 AM
| |||
| |||
(This thread was meant to go in the FAQ section, but it was moved, maybe it doesn't fit in there?) The short answer: For a smaller wood and plastic cutting machine (and maybe – maybe! – some light aluminum), several people on CNCzone seems to have had success with 100-200 oz-in (0.7-1.4 Nm) stepper motors direct driving a 5 turns/inch (5 mm lead) ACME (trapezoidal) screw. The long answer: ... hopefully you can find in the attached file. Please, if you spot any errors or have trouble viewing the file (like missing characters or fonts), write a comment in this thread http://cnczone.com/forums/showthread.php?t=5639, or use the email address in the file to notify me. Other comments are also welcome to my email address. Arvid Last edited by arvidb; 09-03-2004 at 02:23 PM.    |
|
#2
09-03-2004, 07:48 AM
| ||||
| ||||
| WELL DONE! A thorough tutorial. Should be very helpful to anyone starting out. A few pictures as you mentioned earlier would really help. There are some experts out there I'm sure will contribute. Cheers - Jim
__________________ Experience is the BEST Teacher. Is that why it usually arrives in a shower of sparks, flash of light, loud bang, a cloud of smoke, AND -- a BILL to pay? You usually get it -- just after you need it. |
|
#4
09-03-2004, 03:33 PM
| ||||
| ||||
| Resubmit it in the FAQ section again, I will leave it their. Sorry about that.
__________________ Thank You, Paul G Site Owner-Webmaster- Administrator www.rfqwork.com www.cnczone.com www.welderzone.com |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| What motor, screw and gearing should I choose? | arvidb | FAQ of CNC Machine building | 10 | 08-17-2010 12:54 PM |
| What motor, screw and gearing should I choose? v1.2 | arvidb | FAQ of CNC Machine building | 1 | 03-12-2006 04:30 PM |
| Help with formulas for gearing servos | cnctoolman | Benchtop Machines | 0 | 04-07-2005 10:13 PM |
| Reduction Gearing & Backlash | UKRobotics | DIY-CNC Router Table Machines | 2 | 04-02-2004 02:31 PM |
| | |
Linear Mode
