| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
04-13-2008, 03:57 PM
| |||
| |||
1st, thanks to all for advice found here. There are a few picks I've included of the finished machine. The table has T track on 4" centers for hold downs almost anywhere. The speed problem was corrected with dampers I bought from MicroKinetics. Yeah they cost a lbit but my speed got maxed out at 52 ipm due to CPU speed. They ironed the problem right out. I also changed the 1/4" fule line connectors to 1/4" to 5/16" solid connectors from dumpstercnc. The gear pictured is an escapement gear for a clock. I'll post a video on youtube as soon as I can.  |
|
#4
04-15-2008, 07:36 AM
| |||
| |||
| 425 oz. xylotex, cheap $16 router from Harbor Freight. Got a variable speed Rigid laminate trimmer to replace this one when it dies. Check out the video on youtube. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
