First projects on a CNC router

[tanky321]

Hi guys,

Here are some pics of some things I cut out on a CNC me and my soon to be brother-in-law, built.

Its a stand for a tesla coil. Everything was cut on the CNC machine except for the top, but even that has some milling in it!

The letters are a little off, on one side its deeper and darker than the other (not to mention there upside down!!!), but it was one of our first projects, so I dont think were doing to bad...

Let me know what you think!

[esm]

That's diabolical, Congrats!

[cp8071]

Looks like a lot of top-load capacitance for that size secondary. The stand is nice, I need to get around to putting all my parts together (and keeping them together.) But I'm still working on a new MMC capacitor bank, so not sure how much I can fit underneath. Here's a quick video.

YouTube - NST Tesla Coil retuned and using a corona ring

YouTube - NST Tesla Coil retuned and using a corona ring

[tanky321]

Originally Posted by cp8071 Looks like a lot of top-load capacitance for that size secondary. The stand is nice, I need to get around to putting all my parts together (and keeping them together.) But I'm still working on a new MMC capacitor bank, so not sure how much I can fit underneath. Here's a quick video. YouTube - NST Tesla Coil retuned and using a corona ring

Really? I did it out on WinTesla, and it gave me an internal diameter of 12", but il mess around with it I guess.

Id love to get a spun toroid, but there so expensive!!