| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
03-18-2008, 05:53 PM
| |||
| |||
Hello all, Second post, been lurking and reading. My question, Could I make my own V bearings to fit onto inverted angle iron? I was thinking of two skate bearings ( where do you get these in Leeds, W Yorks ?) in a machined housing with the V roughed out and finished with a form tool. I'd make a batch of these to hold sizes, an adjuster on a cam is something I'm struggling to visualise any ideas ? TIA Lee.  |
|
#2
03-19-2008, 10:34 AM
| |||
| |||
| When I built my machine I made my own v bearings for my Z axis(I have a foundry). Having filled that square, I will now happily buy them. Its not hard to make one. getting four that are just alike is a pita. Dave
__________________ In the words of the Toolman--If you didn't make it yourself, it's not really yours! Remember- done beats perfect every time!! |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| linear bearings question. | drfoz | JGRO Router Table Design | 3 | 08-07-2007 09:19 PM |
| linear bearings noobie question | s_a_black | Open Source CNC Machine Designs | 1 | 04-25-2007 08:24 PM |
| 12mm rods and bearings. first machine question | srmaietta | DIY-CNC Router Table Machines | 7 | 04-09-2007 08:26 PM |
| Quick question on bearings for JGRO | Da_Dupa | JGRO Router Table Design | 5 | 09-27-2006 10:28 PM |
| Tapered roller bearings preload question | sendkeys | General Metal Working Machines | 22 | 03-14-2006 02:13 PM |
| | |
Linear Mode
