New Machine Build- start of my router build 39x39

[mjs79]

i have been working on my machine for the past 10 months or so . most of the time was eaten up by saving up to buy the needed parts and supplies .
i first started off by buying all my parts off good old ebay . took some time but the savings were well worth the time .i picked up two 1000mm stroke adept actuators x,y , and 160mm actuator for the z axis .i also picked up the proper lenght thk linear rails for each axis . im using granite devices vsd boards , with 2 ac servos x,y ,and dc brushless z axis . the cnc is being constructed from 1" thick aluminum with widths from 2"-8".
i have had my cousin helping me mill the aluminum for the machine .i also have a friend doing some cnc machine for other parts , which i do not have yet . i will go into more details once i get a bit further on with the build .

here are some pics of what i have got done so far .
feel free to point out any mistake that you may see , as im still learning and this is my first try .














i will post more pics in the next few days .
thanks
mike

[eloid]

nice solid looking start to your machine, your driver board (in blue), who makes them?

[mjs79]

they are made by granite devices , very great guys to deal with . i would suggest them if their boards meet your needs .^^^^^^^