| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
02-18-2008, 04:14 PM
| |||
| |||
| Probotix Kit Fuse Help I purchaced and 3 axis stepper motor/driver kit from Probotix. The manual says to use fuses but it does not say what size. The motors are 3 amps per phase, with a voltage range of 12-48 volts. The power supply is a 24 volt 4.3 amp switching power supply. Can anyone give me advise on what size fuses to use?    |
|
#2
02-18-2008, 05:32 PM
| |||
| |||
| I used 2 amp fast blo's if I remember correctly. I have pics of my probotix setups here, down under the computer section http://www.el34world.com/Misc/Cnc/CNC0.htm |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Probotix | bigtonyicu | Stepper Motors and Drives | 20 | 09-05-2011 09:05 AM |
| Probotix Bi-Polar Stepper Motor Driver | Mr.Chips | Stepper Motors and Drives | 8 | 02-28-2009 05:27 AM |
| Probotix | b25hf4u | Stepper Motors and Drives | 0 | 05-28-2007 09:33 PM |
| Probotix? | jmc | Stepper Motors and Drives | 3 | 03-07-2007 08:48 PM |
| G-201 fuse | Dylwad | Gecko Drives | 2 | 01-19-2005 08:30 AM |
| | |
Linear Mode
