Dinosaur skeleton, and other models, DXF files.

[Chombie]

I have a dxf for 1 dinosaur, i don't know how to post it or where to post help

[ger21]

Here's one.

[Chombie]

the dxf i have is the same as ger21's

[High Seas]

I just got back from the Barnes & Noble Booksellers. In the magazine section - "Scrollsaw" - or some such title - had a 2 page layout to copy and cut out. Think it was a T-rex. Sorry - didn't have the cash on hand to get the mag - but maybe someone will find a similar file.
Cheers - Jim

[Wagner]

http://www.epiloglaser.com/mammoth.htm

Mammoth in cdr and ai-format

http://winnetou.lcd.lu/atelier/Progcadcam/terrydxf.zip

[HomeCNC]

I just finished scanning the Raptor that is from B.C. bones, just like the picture at the start of this thread. I purchased 4 B.C. Bones kits.

1) Velociraptor
2) T-Rex
3) Stegosaurus
4) Pterandodon

I have the Raptor in my CAD system and have cleaned it up. I am going to enlarge it by 2.5 times. This will make a dino about 3 feet tall.

Christmas present for my nephew. I will post it when it's ready.

[Ozzybee]

I took the dino font file, picked out the T-Rex letter and converted it directly into a dxf. The slot will appear as a line but as stated before pick your tooling the same as your material thickness and the slots will come out fine.

[Wagner]

Another T_Rex

http://www.cnczone.com/forums/attach...tid=4137&stc=1

[HomeCNC]

I cut one panel last night of my Raptor. It is going to be great! I have attached the DXF file for anyone who wants it.

OZZYBEE - Your DXF is not machinable. It was saved in the iso view.

[ger21]

Jeff, you're using G41/G42 for that, right? Also, what did you create the .dxf's in? They're some weird type of polyline that I can't seem to modify or edit in any way. Were they splines? Just curious, thanks.

[trilect]

I'll have to look around myself and see if I can find a few things to make dxf's out of and post them for for future tech ideas.

will a 2004 dxf work for you? would I need to set a thickness or would a 2d dxf work?

[Ozzybee]

I tooled and machined the TRex.dxf file I posted on a Northwood Router I have at my workplace. I use autocad 2002 and the file was not an iso file.