Vee Cutting Bit

[ljoe1969]

Hi I was wondering if someone could recommend a v bit to cut pics in wood.

I just wanna cut about 1/8" deep. Kind of like draw on the wood. only cutting.

[kong]

Not sure if you have CMT tools in the US, but I have had excellent results with this cutter.
http://www.axminster.co.uk/default.asp?part=858001
Gives a lovely finnish on the wood, and has a good length if you ever need to cut deep.

[ger21]

http://www.eagle-america.com/html/ca...p.asp?id=87712

[tjstraz]

I bought a 90 degree and a 60 degree Whiteside bits from this source. Would buy from again.

http://www.auctionworks.com/store/it...241&id=5460424

http://www.auctionworks.com/store/it...241&id=5460464

Tim

[dmgdesigns]

www.routerbits.com Whiteside bits imho are very good quality for the price.

[Chombie]

Amana tools has small .25 dia v grooving tools
http://www.amanatool.com/bits/45700.html (scroll down the page)

[samualt]

Anyone know where I could buy a set of bits for a CNC router? I'm a real newbie when it comes to this stuff. I'd like to start out with a whole set. I see the sets at many places but they are obviously arn't made for CNC routers because they have no v-bits at all in them.

Perhaps someone here could write something about bits so we don't end up buying the wrong ones. Maybe it could say which bits are good for which jobs. Or, perhaps you know of a web page that talks about CNC router bits. Any info appreciated.............