source for servo motors

[eloid]

anyone have any good leads or place to order
servo motors from... 800oz or so

[wcarrothers1]

camtronics

http://s120220635.onlinehome.us/


b/.

[Thazul]

HomeshopCNC - http://www.homeshopcnc.com/page4.html
Keling Tech Inc. - http://www.kelinginc.net/ServoMotor.html

-

Andy

[eloid]

ive looked at some these guys,
kelinginc.net tends to have offshore clones

im not sure about others, nobody shows there torque cruves, i have
ask but no replys back, nor do there state where there made?
Shounds like china?

[wcarrothers1]

Hate to tell you Eloid.. But everything is made in china these days. How ever I I think the optical incoders that Dan M puts on his are made in the us even if the motors are not.

Surprised if you emailed him that he had not gotten back though. He has always been VERY VERY good with responding to me. Even sent extra connectors to me for making my controller switchiable between my 2 machines and stuff..

BUt anywho.

b.

[eloid]

There quite a difference... between made in china by usa companys vs cheap chinnes junk and quality manufactures in china, one is just crap... would only last one time ....and clones never have data sheets nor info with them.... take a look at these motor from oriental motors... they just put to shame the others... for torques curves

http://catalog.orientalmotor.com/bro...&assetid=40019

http://catalog.orientalmotor.com/ite...ilter=&by=prod

Originally Posted by wcarrothers1 Hate to tell you Eloid.. But everything is made in china these days. How ever I I think the optical incoders that Dan M puts on his are made in the us even if the motors are not. Surprised if you emailed him that he had not gotten back though. He has always been VERY VERY good with responding to me. Even sent extra connectors to me for making my controller switchiable between my 2 machines and stuff.. BUt anywho. b.

[wcarrothers1]

THought you were looking at servo motors.. one you called out is a stepper.

b.

[eloid]

Originally Posted by wcarrothers1 THought you were looking at servo motors.. one you called out is a stepper. b.

point was there is good chinnes made and there is crapy staff no matter servo or stepper, im looking for the good stuff.

[wcarrothers1]

I'm pretty sure camtronics has sold plenty to know good from bad..

The first I got were the Moog servos for my round pole mill. So not sure those qualify as china ones since I don['t think they were. But my big 1100oz ones on my router mill were (I'm pretty sure) from china or some where out there. How ever I can say they are plenty good.

b./