Another Newbie begins!

[HomeMadeCnc]

Well its been awhile, doesn't matter what you have for toys in the shop if you don't have youe health to enjoy it. I'm back on the road to recovery and to celebrate I decided to spend, spend, spend. I picked up a Columbo rv90 and a 4" rotary table. There will be a Mechmate head mounted on my first machine with the spindle. I'm hoping for a month to build and get it all running. Thanks to Heath for getting the mechmate parts lazer cut for me.
The journey continues. . . . . . .Pictures will follow.

[Mr.Chips]

Originally Posted by HomeMadeCnc Well its been awhile, doesn't matter what you have for toys in the shop if you don't have youe health to enjoy it. I'm back on the road to recovery and to celebrate I decided to spend, spend, spend. I picked up a Columbo rv90 and a 4" rotary table. There will be a Mechmate head mounted on my first machine with the spindle. I'm hoping for a month to build and get it all running. Thanks to Heath for getting the mechmate parts lazer cut for me. The journey continues. . . . . . .Pictures will follow.

You are correct, we didn't get a guarantee, only a promise. A very special promise.
Good luck and smell the roses on the way. And send pictures!!

[domino11]

Tim,
Good to hear your feeling better. Hope the laser cut parts work out well for you. Will be talking to you soon.

Heath.

[HomeMadeCnc]

Well its been awhile. The first machine has been dismantled and a new build has begun. http://www.mechmate.com/forums/showthread.php?t=1233 If your interested. I'll be needing a hand to figure out the hookup of my PDS Columbo 90rv and getting the tool changing done as well.

Keep Building!
Tim

[domino11]

Tim,
Table is looking good. Really looking forward to seeing that spindle in action. That is a real nice looking beast!