My new diy cnc router

[meirmark]

Hi all.
At last it's looks like a finished machine.

Table size 380mm x 380mm.
24v DC servo motors on X,Y,Z.
Gecko 320 servo drive.
Pentume III 1GHz.
Self made limit switch control board with Altera FPGA.

and now it's software time (Mach3)

[Guldberg]

Sweet. Do you have pictures of the building process and some more close-ups of the machine itself

[diluded000]

Very nice. Is that table made from one piece, or is it extrusions joined on edge? And is there a linear bearing in there somewhere, or are you sliding aluminum on the steel shaft? (I made a sliding router table that, due to a design/cost comprimise, does it both ways)

- James B

[meirmark]

Thanks.
There are more pictures in the gallery.

[pminmo]

Very nice. Did you use Quartus II WE to do the Altera ?

[meirmark]

Thanks.
For the altera I used the MAX +plus II, I used an old chip (max 7032LC44).

[meirmark]

More pictures.

[walter]

Pretty solid!