My new DIY CNC

[romy]

hi guys,

i'm Romy and i write you from Italy.for first thing Sorry for my English

i follow you and the italian friends for about two yaers ant this is my long job.

this is the picture of my DIY gantry CNC i hope is good for you and i'm happy for suggestion and comments.

ciao

[vcooney]

Hello Romy,

Nice setup you have there. I haven't seen that style of gildes before, how well do they work? Did you buy this as a kit?
Keep the pictures coming...nice work.
Nice puppy too.

Vince
California, U.S.A.

[romy]

hi Vince,

yes my dog is my only assistant

you can find the guides and profile on this German producer: www.item.info

go on System MB and go to slide unit.

sorry for my english i know is not perfect but i think you understand me

thanks and bye

romano
Arce, Frosinone (Near Rome)

[Switcher]

Nice machine.

What is the black material that supports the "Y axis", is that wood?

.

[mxpro32]

that looks awesome. Is that HDPE (the black parts) you are using for the gantry uprights and the base ends?

[romy]

the black material is steel.

i haven't used wood on this machine it's all alluminium and steel

bye

[Mr.Chips]

Romy,

A really good looking machine, and with thoes steel side pieces there won't be any flexing.
Could you supply some information about your control box,
What voltages /Amps are you running?
Did you make or buy the torrid coil?

Keep up the good work and keep the pictures coming.

Hager

[eloid]

im wondering.... do u have any info on how much it has cost u just for the item railing hardware ... no motors no, electronics just glides and hardware bearing etc stuff no pc
item has nice stuff.... nice job on the build....

Originally Posted by romy hi Vince, yes my dog is my only assistant you can find the guides and profile on this German producer: www.item.info go on System MB and go to slide unit. sorry for my english i know is not perfect but i think you understand me thanks and bye romano Arce, Frosinone (Near Rome)

[romy]

hi to all guys.

for Mr.Chips:
i bought the torid and the motor run at 48V.The H bridge for each motor is made by fiser take a look on his site: www.fisertek.it
the LPT buffer is made by Nervino to this site: http://www.globalinkcnc.com/

i've used a PC suplly for the board and other compnents is of normal use.

sorry but i'm not an electrician but mechanic.

for eloid:

1 meter of guide (profile + 2 round shaft hardened) 150€
1 slide unti complete with roller and bearing 120€

it' too expensive but much easy to mount

sorry for my english

bye