| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
07-25-2007, 07:48 PM
| |||
| |||
Hi, im new to this CNC hobby and wanted to try to make one myself i have been researching this alot and i think i could build it. I had a question about the controllet for the stepper motors. I wanted to make one myself since buying one is pretty expensive and i found the site with instructions on building a controller and wanted to know if it would work with stepper motors and with the mach 3 program? http://www.electronics-lab.com/projects/pc/008/ Thank You Last edited by pettiger15; 07-26-2007 at 01:46 PM.  |
|
#2
07-26-2007, 09:05 PM
| ||||
| ||||
| Yes, that should work.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#3
07-26-2007, 09:12 PM
| |||
| |||
| would i be possible to use a bipolar stepper motor? |
|
#4
07-26-2007, 09:14 PM
| ||||
| ||||
| I think the 5804's are hard to obtain, you should visit pminmo.com for other options.
__________________ Mhel "me and my unselfish genes" |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DeskCNC 2nd. gen controller AND HobbyCNC Pro Controller | maycom | DeskCNC Controller Board | 1 | 06-02-2007 01:33 PM |
| which controller to use? | willhrt | General CNC (Mill and Lathe) Control Software (NC) | 1 | 05-19-2006 06:39 AM |
| Cnc controller. | Smackre | General Electronics Discussion | 0 | 05-02-2006 08:56 PM |
| Controller or cam? | Halfnutz | Mach Software (ArtSoft software) | 2 | 04-19-2005 07:21 AM |
| CNC controller | justCNCit | General Electronics Discussion | 2 | 03-23-2004 01:32 PM |
| | |
Linear Mode
