Want to purchaes a CNC

[underwaterpros]

Does anyone make these DIY CNC and sell them. PLease I dont have the time to find all the parts and put one together. I would be interested in purchasing one. I would like to find one 50x50 or 50x98. Thansk I hope i posted in the right area if not I apologize.

Or maybe I could pay some one to do it for me. Thansk chad

[Switcher]

With or without table:

http://www.ez-router.com/index.asp?P...TS&Category=43

.

[wcarrothers1]

The EZ router stuff looks cool. Had not run into that site yet..

Similar design to what I did I suppose. Close to mechmate as well.

How ever... The way the gantry is layed out clamping pieces from the sides would be even more dificult to do then my version..

Wonder if anyone has ever put a name to the different gantry types..

For example this would be a side gantry? and ones that support the gantry from runners under the table would be under table gantry.hehe

In any case looks like some cool stuff