Simple Machine 3D Drawings

[vacpress]

Heres some stuff I was working on a while back

[vacpress]

Made of: 1inx1inx.125 aluminum frame
18 Stainless steel 1in rod from old dot matrix printers with brass bearings
1/2-10 ACME leadscrew
NEMA34 Steppers
.25&.5 Acrylic Parts
"Storefront Window Extrusion"
Etc.

[vacpress]

ONE LAST IAMGE:

[teilhardo]

Have you made this yet? I have been looking for size 34 steppers forever! They are pretty rare and therfore pretty expensive on ebay. Do you know of any good sources Vac?
Thanks,
Tei

[vacpress]

http://www.torontosurplus.com/redire.../ind/ind45.htm


there are $35 NEMA34 steppers here. apparently 300oz/in. best value ive seen. need geckos tho. or some powerfull unipolar driver.. i may use these for a 3x3x1' gantry router i am trying to amass parts for.

[arvidb]

I like it!

Arvid

[moose]

What CAD package are you using to model this with?

[vacpress]

solidworks 03.

[teilhardo]

Thats a great deal!
I'll have to get some

[vacpress]

heres a smilar machine, designed for Foam Cutting - picture a hot wire drawn between the two upright axis...

[jdebuck]

Originally posted by teilhardo Have you made this yet? I have been looking for size 34 steppers forever! They are pretty rare and therfore pretty expensive on ebay. Do you know of any good sources Vac? Thanks, Tei

vacpress...
Are these the ones you are referring too?

Japan Servo KP86SM2-002 Stepping Motor
2.35 VDC, 1.8 Degrees/Step

or these?

Superior Electric Slo-Syn M062-FD09 Stepping Motor

[vacpress]

the japan servo motors. i have no firsthand experience with them - i did start a thread about them long in the past. i have tried to call that place once and i dont remember what happened.. busy signal or something. no answer, cant remember.. if someone orders some, please tell us how it went. ask if they have other steppers laying around!