| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
03-13-2004, 11:56 AM
| ||||
| ||||
/*dyslexia mode ON Hi all. I am wondering if the motors one chooses for the project must be all the same for the 3 axis. Is there chance to use different motor for the Z axis ? /*dyslexia mode OFF Last edited by Konstantin; 03-13-2004 at 12:12 PM.  |
|
#3
03-14-2004, 12:08 AM
| |||
| |||
| I don't see a problem with using different motors, and sizes for different axis', as long as the axis is engeneered for that motor, and the software is told the specifics for each.
__________________ Stop talking about it and do it already!!!!! (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
