How I built my CNC - CNCzone.com-The Largest Machinist Community on the net!

scheek · #1 02-27-2007, 08:12 AM

I thought I might pass this info to others for FREE. This is how I built my CNC and it works great (so far). I have modified once but, all in all, this is how I did it. I got some great help here on this site and could not have completed without some wonderful help from you smarter guys.

Anyway, through many mistakes, I finally completed and got up and running.
Now I'm really enjoying my machine and learning more and more about this robotic thing that I made.

I hope this helps some frustrated guys out there.

Stephen Cheek
Kosciusko, MS

dwarf · #2 03-01-2007, 03:20 AM

thanks for sharing your know-how with us...

have an efficent and happy day..

scheek · #3 03-01-2007, 06:58 AM

Sure. Glad to help.

It's not a perfect store-bought machine but a darn good one. As I said, I'm enjoying learning the abilities of it.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
has anyone ever built one of these...	savvypower	I.C. Engines	0	02-11-2007 02:56 PM
I built this on a VM-22	AMCjeepCJ	Milltronics	14	02-27-2006 07:49 PM
Anyone built their own CNC Lathe (DIY)	MrBean	General Metal Working Machines	3	03-02-2005 05:56 PM
Here is the DIY I built.	ljoe1969	CNC Wood Router Project Log	4	02-28-2005 03:42 PM
Built it, need help using it!	Lionclaw	DIY-CNC Router Table Machines	7	01-12-2005 09:25 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)