Multiple axis questions - CNCzone.com-The Largest Machinist Community on the net!

ynneb · #1 03-03-2004, 02:40 AM

I would like to do a drawing of a multiple axis machine.
I would like to show how all the axises move.

I can understand how 4 axis works, but even though it was explained to me how a 5 axis works and emulator axises works, I would like a refresher so I can do the drawing well.

Thanks for helping me.

Max · #2 03-03-2004, 08:52 AM

http://www.rainnea.com/cnc.htm

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
4020 4th axis problems	little bubba	Fadal	3	06-13-2005 09:08 PM
No Encoder Counts On X Axis. Y=OK	murphy625	CamSoft Products	5	03-08-2005 08:20 PM
2 axis to 3 axis conversion	drembedded	Bridgeport and Hardinge Mills	10	10-27-2004 11:32 AM
My Lathe project; might CNC it one day	Stevie	General Metal Working Machines	86	06-21-2004 08:27 PM
2.5-Axis vs 3-Axis	JamesBond	General Metal Working Machines	6	07-26-2003 07:09 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)