| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
02-09-2007, 03:03 AM
| |||
| |||
I am having trouble to get the spindle to run on a Colchester 600 with Fanuc 3T. I have entered the G codes to run the spindle on MDI but with no luck. Will not run on auto either, seems to not complete reading the line. X & Y axis are operating corectlly as is tool index. Drive motor has been checked electrically & is O.K. Any ideas????  |
|
#2
02-09-2007, 11:56 AM
| ||||
| ||||
| im not sure on that machine but normally you use a M3 clockwise M4 c.clockwise M5 to stop, they need to be accompanied by an S like S1000 but you may need to find out if you need to call up a gear
__________________ individual who perceives a solution and is willing to take command. Very often, that individual is crazy. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Running hot, really, really hot | imagineer | Stepper Motors and Drives | 10 | 01-18-2007 08:51 AM |
| Running a Fanuc spindle motor | Fudd | General Metal Working Machines | 3 | 11-11-2006 09:21 AM |
| Spindle quit running w/ c axix fault | TomCNC88 | Fadal | 7 | 07-28-2006 10:07 AM |
| Running an ATC | chrisw765 | Mach Software (ArtSoft software) | 6 | 11-08-2005 07:20 PM |
| Up and running! | maxxgraphix | DIY-CNC Router Table Machines | 5 | 03-16-2005 07:10 AM |
| | |
Linear Mode
