01-20-2007, 10:44 PM
|
| | | Join Date: Jan 2006 Location: USA
Posts: 17
| |
Check out the construction of MultiCam routers. http://www.multicam.com/eng/Products/routers.html Gudel has an interesting construction. They take a skin cut on the tubing and then bolt short sections of guides onto the tubing with small bolts. Our company has one of their units based on the FP-6HD. For as big and burley the units are, they are still cam rollers riding on simple steel bars. One bar has a rack and the drive servo with a pinion is carried on the carriage. http://www.gudel.com/en/products/modules/fp/
Check our Gudel's download area, a ton of ideas there.
Stan |
Linear Mode
