| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-15-2006, 11:03 PM
| |||
| |||
Shown in the pic there are no visible mounting holes from the top, so they must have drilled from the bottom and ran a bolt up to the stanchion. Is this the only way to do this? I am making stanchions to hold the shaft and screws and trying to find the best way to mount to the table using the same 8020 style frame as shown.  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
