DIY CNC Router Steele Large Table

[Wineryrjd]

Never heard of tempered hardboard is this MDF or can this be subtituded for other board 1/4 in thick

Thank you for your time ,,, rjdwinery

[Hyrum R]

Tempered hardboard is the stuff that peg boards are usually made out of. It usually has a textured back side, and can be found at about any hardware store. However, 1/4" MDF will work just as well. I used MDF for some parts on my table and hardboard for others, just depending on what scraps I found laying around the shop.

http://en.wikipedia.org/wiki/Hardboard