| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
10-09-2006, 10:53 PM
| |||
| |||
Hi all I was looking at some precision acme rod. So far nook industries from MSC seems to be the best deal http://www1.mscdirect.com/CGI/NNPDFF...8362&PMCTLG=00 but I am not sure about the size. I am looking at the 1/2 in rod. they have a 1/2 -10 and a 1/2-2 does this mean 10 turns per inch and 2 turns per inch? I guess both are single start? I really wanted a 2 start 5 turn per inch rod. Anyone know where I can find this type with good precision (maybe +-.003/foot) thanks for the help Kev  |
|
#2
10-09-2006, 11:08 PM
| ||||
| ||||
| The 1/2-2 is 1/2-10 5 start. You can get the 1/2-10 2 start from Nook directly, or Keystone from MSC.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
