| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
09-18-2006, 07:58 PM
| |||
| |||
Hi to who will answer a ? for me, could someone guide me to a site or some infomation on building a vacuum hold down table for a cnc router. iam in the process of making a 36 x 36 router, and i would like to use a vacuum table, need help in how the construction works and where to find parts, this would be of great help thanks. barth11496    |
|
#2
09-18-2006, 08:22 PM
| ||||
| ||||
| THis thread might help. Vacuum Table
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#3
09-21-2006, 10:22 AM
| |||
| |||
| Sir, See Carter Products Company, www.carterproducts.com There is another Co. which makes individual vacuum pods which are interconnected with hoses and thus movable to accomodate unusual sizes, but I can't find their ad. Regards, Jack C. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
