| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
08-28-2006, 07:10 PM
| |||
| |||
I been beating my brains trying come with the name of this item. It is a hard rubber cone shape/flat on both ends with bolt through it used for mounting just about anything. Usually 1/2 to maybe 2 inches tall. thanks bill    |
|
#2
08-28-2006, 08:16 PM
| |||
| |||
| Vibration isolators?
__________________ Steve DO SOMETHING, EVEN IF IT'S WRONG! |
|
#3
08-28-2006, 09:18 PM
| |||
| |||
| Rubber feet.
__________________ If it's not nailed down, it's mine. If I can pry it loose, it's not nailed down. |
|
#4
08-28-2006, 10:05 PM
| |||
| |||
| Well, I thought I'd would recognize the name if I heard it. vibration isolators and rubber feet does not ring a bell. It is something used very often under stationary small machines, small applicances, and some air compressorss. I plan to use these on light weight cnc machine (about 100 lbs or so). It is very common and usally its in black or gray. As I stated it is conical shape about 1 to 1 1/2 at the top with 1/2 foot print. I remmember seeing them in hardware stores. thanks bill |
|
#5
08-28-2006, 10:22 PM
| ||||
| ||||
| Rubber bumpers? See www.mcmaster.com page 3525
__________________ HayTay Don't be the one that stands in the way of your success! |
| Sponsored Links |
| |
|
#6
08-28-2006, 11:40 PM
| |||
| |||
|
__________________ Steve DO SOMETHING, EVEN IF IT'S WRONG! |
|
#7
08-29-2006, 12:54 AM
| |||
| |||
| haytay, thanks for the web address. these will work better than what I had in mind. thanks bill |
|
#8
08-29-2006, 01:08 AM
| |||
| |||
| I thought you said you needed a mount. Bumpers and feet are not mounts. gl with your quest.
__________________ Steve DO SOMETHING, EVEN IF IT'S WRONG! |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
