| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
02-24-2006, 09:38 PM
| |||
| |||
Ive got a lot of parts here, ready to make my aluminum gantry router. Will be using .5" plate all the way around, linear rails, Nema 34's. It should be a great machine, but the weight is really coming fast! This gantry needs to have 24" of travel, and that it does. So my question is, How much does your gantry weigh in at? I would just like to know to compare    |
|
#2
02-24-2006, 10:41 PM
| ||||
| ||||
| Mine weighs about 75 lbs. 40" beam with 30-31 inches of travel. That's complete, with Z-axis and router mounted.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
