Need Help! Scripter Compile Error. in:M3. M1s - CNCzone.com-The Largest Machinist Community on the net!

Dan911 · #1 10-21-2011, 02:39 PM

Hoping some1 could explain why I'm receiving this error in Mach 3. It happens when running G code and get to the "M3 S24000" line. Spindle don't turn on and I get that error.

Thanks,
Dan

Walky · #2 10-21-2011, 02:47 PM

Originally Posted by Dan911

Hoping some1 could explain why I'm receiving this error in Mach 3. It happens when running G code and get to the "M3 24000" line. Spindle don't turn on and I get that error.

Thanks,
Dan

My gcode knowledge is very limited so I might just be talking nonsense, but shouldn't that be "M3 S24000"?

Dan911 · #3 10-21-2011, 03:16 PM

Thanks Walky, but I made and error on post unfortunately the code was correct, I just edited it.

Thanks again,
Dan

ger21 · #4 10-21-2011, 04:38 PM

Open M3.m1s and see what's in it?

But, first, try closing Mach3, and rebooting Windows and see if it fixes the problem.

Dan911 · #5 10-22-2011, 08:39 AM

The reboot fixed it, thanks Ger.

Dan

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Help!- Matsuura Mc500v seq error/magazine error	mc500v	General Metal Working Machines	10	01-08-2010 01:35 PM
Need Help!- Error 414 Z axis error detect- servo alarm	andywids	Fanuc	0	07-09-2009 10:33 AM
Need Help!- Error 414 Z-axis error detect servo alarm	andywids	General Metal Working Machines	1	07-09-2009 09:56 AM
compile error, Library not found	innova	Autodesk Software (Autocad, Inventor etc)	0	01-17-2009 10:22 AM
EMC 2 compile?	mkonci1	LinuxCNC (formerly EMC2)	2	04-12-2006 02:21 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)