| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#2
10-03-2005, 07:14 AM
| ||||
| ||||
| Miter saw with a triple chip blade.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)  |
|
#3
10-03-2005, 07:35 AM
| |||
| |||
| Ok, got the miter saw, and several blades from 18 -60 teeth. Not sure what a triple chip blade, can you elaborate a little, maybe a link where I can get one.
__________________ ***For full up to date details visit my blog @ www.donald-neisler.com Donald Neisler |
|
#4
10-03-2005, 07:56 AM
| ||||
| ||||
| There's a picture here, if you scroll down. http://www.oldham-usa.com/Products/S...components.htm If you don't have one, use the highest tooth count you have.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#5
10-03-2005, 08:20 AM
| |||
| |||
| Ok, thanks. I have a 60 tooth, you suggest buying that triple chip, or a higher tooth blade, or you think the 60 I have would work?
__________________ ***For full up to date details visit my blog @ www.donald-neisler.com Donald Neisler |
| Sponsored Links |
| |
|
#6
10-03-2005, 08:24 AM
| ||||
| ||||
| It should work, just go slow.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#7
10-03-2005, 08:24 AM
| ||||
| ||||
| If you're making a lot of cuts, you might want to use a little WD40 for lubricant.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
