New Machine Build AltCNC - CNCzone.com-The Largest Machinist Community on the net!

Nadiel · #1 04-05-2011, 11:02 AM

Hello everyone,
I want to begin with thanks to all those on the forum I had to learn that I have been a real help to build this CNC
Some details:
construction of steel and aluminum profiles (recovered), 4X trapezoidal screw thread 16 and be double adjustable wrench on each bolt, the Ertalite TX, cast and machined housing linear bearings "in house", linear bearings 20 on Y and Z, 16 X, limiting head race (microswitch), X4 3Nm motors, drivers, 4.2A, 50 mm MDF worktop, Kress Milling 800 W
Dimensions: L = 1400mm L = 1300mm, I = 1550 mm, travel of useful 1150X1050X250 mm
Work-load speed of 2500 mm / min with no loss of steps, I did test milling 2000 mm / min without pre-processing errors large enough.
How fast can I buy a water-cooled milling 2.2 KW, and inverter.

Any suggestion is welcome !

Some pictures ...

Name: AltCNC (19).jpg
Views: 1725
Size: 172.6 KB

Name: AltCNC (19).jpg
Views: 1725
Size: 172.6 KB

Name: AltCNC (20).jpg
Views: 1727
Size: 170.1 KB

Name: AltCNC (21).jpg
Views: 1719
Size: 167.2 KB

Name: AltCNC (22).jpg
Views: 1723
Size: 163.3 KB

Name: AltCNC (23).jpg
Views: 1717
Size: 169.4 KB

Name: AltCNC (24).jpg
Views: 1732
Size: 178.0 KB

Name: AltCNC (46).jpg
Views: 1706
Size: 160.7 KB

Name: AltCNC (47).jpg
Views: 1703
Size: 189.7 KB

Name: AltCNC (48).jpg
Views: 1708
Size: 185.4 KB

Name: AltCNC (49).jpg
Views: 1706
Size: 180.4 KB

Name: AltCNC (50).jpg
Views: 1705
Size: 185.1 KB

Name: AltCNC (51).jpg
Views: 1671
Size: 197.8 KB

Name: AltCNC (52).jpg
Views: 1684
Size: 196.0 KB

Name: AltCNC (53).jpg
Views: 1697
Size: 207.9 KB

Name: AltCNC (1).jpg
Views: 1664
Size: 165.1 KB

Name: AltCNC (4).jpg
Views: 1660
Size: 171.0 KB

Name: AltCNC (5).jpg
Views: 1655
Size: 194.6 KB

Name: AltCNC (6).jpg
Views: 1653
Size: 198.0 KB

Name: AltCNC (7).jpg
Views: 1637
Size: 176.0 KB

Name: AltCNC (8).jpg
Views: 1644
Size: 173.4 KB

Name: AltCNC (9).jpg
Views: 1642
Size: 190.1 KB

Name: AltCNC (10).jpg
Views: 1637
Size: 169.3 KB

Name: AltCNC (11).jpg
Views: 1644
Size: 182.7 KB

Name: AltCNC (12).jpg
Views: 1632
Size: 181.4 KB

Name: AltCNC (13).jpg
Views: 1621
Size: 174.6 KB

Name: AltCNC (14).jpg
Views: 1629
Size: 181.8 KB

Name: AltCNC (15).jpg
Views: 1626
Size: 173.6 KB

Name: AltCNC (16).jpg
Views: 1640
Size: 170.5 KB

Name: AltCNC (17).jpg
Views: 1643
Size: 179.6 KB

Name: AltCNC (18).jpg
Views: 1627
Size: 187.9 KB

Nadiel · #2 04-05-2011, 11:19 AM

Tests in MDF...

Name: AltCNC (43).jpg
Views: 1624
Size: 202.0 KB

Name: AltCNC (44).jpg
Views: 1632
Size: 222.0 KB

Name: AltCNC (45).jpg
Views: 1640
Size: 242.7 KB

Name: AltCNC (2).jpg
Views: 1637
Size: 174.9 KB

Name: AltCNC (3).jpg
Views: 1617
Size: 191.7 KB

Name: AltCNC (25).jpg
Views: 1641
Size: 175.5 KB

Nadiel · #3 04-05-2011, 12:09 PM

Other images...test in MDF

Click image for larger version

Name: AltCNC 55.jpg
Views: 133
Size: 245.4 KB
ID: 130842

Click image for larger version

Name: Fotografie0434.jpg
Views: 106
Size: 161.3 KB
ID: 130843

Zygoat · #4 04-05-2011, 06:10 PM

Looks very nice, good to see you cutting with it as well.

DonFrambach · #5 04-06-2011, 09:40 AM

Very clean hold down system. Congrats!

gearsoup · #6 04-07-2011, 07:43 PM

I must say, that is one very clean setup you have there. very nice indeed

AssassinXCV · #7 04-08-2011, 01:39 AM

This is great! Will keep me inspired to build a bigger machine in the future. Very clean indeed.

Cheers.

yak51 · #8 04-08-2011, 03:42 AM

Beautiful machine, very professional building.

tommylight · #9 04-10-2011, 03:24 PM

NEAT!!! That is so nice to look at , and that is something i will never do, i build things i test the sh$@%@t out of them and that's it !!! i never take the time to tidy up or use them for anything useful, i just build!
Great work.
Tom

louieatienza · #10 04-10-2011, 07:17 PM

Nice machine! And good work too with your cuts...

leaveme · #11 04-10-2011, 10:20 PM

Brilliant machine! Love to see it.

Nadiel · #12 04-18-2011, 12:53 PM

Thanks for the feedback, if anyone wants more details or pictures, please tell me.
When I have time, I will put some videos with AltCNC, while working.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)