| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#2
03-23-2011, 03:37 PM
| ||||
| ||||
| Use two drives, two motors, and slave them in software. Each motor needs it's own step and direction signals, so you'll need 4 output pins for the X axis.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| dual axis 16f628a stepper driver | yaycnc | PIC Programing / Design | 2 | 10-30-2011 03:56 PM |
| Build Thread- dual stepper setup question . | tony978 | Open Source CNC Machine Designs | 0 | 08-22-2010 10:03 PM |
| Dual stepper question | MrWild | Stepper Motors and Drives | 4 | 11-28-2005 10:27 PM |
| | |
Linear Mode
