| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#2
 
10-28-2010, 04:24 AM
| |||
| |||
| I will look when I get a chance but its one of these from this page. Its made for High pressure/shock applications eg linear rails etc. Workshop Consumables | Lubricants, Greases and Cutting Fluids | Industrial Lubricants Will post back the one. BTW I did not pull this from thin air I looked into it and this one (when I get a chance to look at what one it is) cross referenced from ones they sell on many CNC sites  .I will report back in a couple oh hours.  |
|
#3
10-28-2010, 05:32 AM
| |||
| |||
| Ok as promised Its this one Castrol | Workshop Consumables | Lubricants, Greases and Cutting Fluids | Industrial Lubricants | Bearing Grease |9037 7318 |
|
#5
10-28-2010, 10:30 PM
| ||||
| ||||
| I don't have R&P (standard .5" Leadscrews) but I would recommend a dry lube like graphite powder. My experience with fine dust and any kind of "wet" lubricant almost always results in a globby mess... |
| Sponsored Links |
| |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- re Spindle Lube and Lube Pump | robkuhi | Tree | 15 | 10-24-2011 12:49 PM |
| Which way lube oil? | WilliamD | General Metal Working Machines | 4 | 02-26-2007 08:46 PM |
| Lube | monte55 | Linear and Rotary Motion | 2 | 09-17-2006 04:42 PM |
| Tap Lube | Gitanes | General Metalwork Discussion | 5 | 11-26-2005 07:45 AM |
| I need lube! | CNCadmin | General Metal Working Machines | 11 | 06-01-2003 08:25 AM |
| | |
Linear Mode
