Not a diy build but a first step - CNCzone.com-The Largest Machinist Community on the net!

adambrum · #1 09-07-2010, 10:34 AM

I have looking a building myself a small cnc router mainly for acrylic but as its my first venture into diy cnc i have been looking at kits when i came across one on ebay.

The kit retails a reasonable £650 which includes mach 3. eventually i will build my own but to get me started i thought it might be a good idea.

Here's the link to the machine ebay miller.

i know its not going to be the best but what do you guys think.

Thanks Adam

doorknob · #2 09-07-2010, 03:13 PM

It looks to me like it is similar or identical to the types of machines discussed in a CNCZone thread with the title of "Tonsen - eBay ReadyToRun Mill".

Look at the photos on page 3 of that thread at http://www.cnczone.com/forums/showthread.php?p=821019

You will probably find some useful discussion there.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Help!- Loosing step more and more on X axis only after reducing the accl/velocity step motor	Calico	DIY-CNC Router Table Machines	3	04-09-2010 07:23 PM
Need Help!- Step/Direction pins should be Step FWD and Step BACK	rayscott	Mach Software (ArtSoft software)	6	02-09-2010 05:57 PM
Build a CNC step by step...	Coogrrr	Open Source CNC Machine Designs	5	08-21-2008 09:42 PM
Step by step cnc plasma with parts list and links.	massajamesb	CNC Plasma and Waterjet Machines	8	07-08-2007 10:22 PM
Who wants a build; step by step?	Stevie	Vertical Mill, Lathe Project Log	7	01-19-2005 09:50 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)