| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
08-25-2010, 09:40 AM
| |||
| |||
Newbie Question? I am in the process of finishing my CNC router design. •It will be a 4x8 full cutting bed. (Still working on the overall bed size for this) •Will be using rack and pinion on the x and y axis. •Will be using 2 1100oz/in motors on the x axis and 1 1100oz/in on the y axis. •Will be using acme on the z axis with 8” travel and 1 600oz/in on this axis. I am trying to decide either using a dc brushless system or stepper motor with micro stepping. I have been looking in the forum and have seen some reasons, but not convincing info. I know that most are building with stepper motors. I plan on cutting panels, sign making and carving also. I am still leaning too the stepper motors. Any comments or suggestions are welcome. Cheers… Howard  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Build Thread- dual stepper setup question . | tony978 | Open Source CNC Machine Designs | 0 | 08-22-2010 10:03 PM |
| smooth stepper setup | eloid | DIY-CNC Router Table Machines | 3 | 06-05-2009 07:32 PM |
| Problem- New setup with no stepper movement | rofuth | Stepper Motors and Drives | 5 | 03-02-2008 04:11 PM |
| No idea how to setup the stepper motor | Syphonics | Stepper Motors and Drives | 12 | 03-06-2007 08:43 AM |
| stepper setup, Electrical noise ? | veteq | Stepper Motors and Drives | 3 | 02-07-2007 10:31 PM |
| | |
Linear Mode
