| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
08-12-2010, 11:23 AM
| |||
| |||
Hello to all members! i m new in cnczone community and i need your help i m from Greece and my english are not too good now my problem i made a cnc router and i m using the cncplus amw102 controller with 3 axis all are ok with x and y axis but i cant move the z axis i have put the pins for dir and step as the manual says but the z axis not work Thanks  |
|
#2
08-12-2010, 11:39 AM
| ||||
| ||||
| Hi, Several things to check would be: All wiring to Z axis motor Bad Z axis motor...swap motor to another axis to test... Bad Z axis controller... put a different motor on Z axis to test... Not familiar with your driver board so can't help too much more.... Jeff |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| (5 axis) Mach 3 not moving C B axis | hamooteh | Mach Software (ArtSoft software) | 12 | 03-22-2010 12:49 AM |
| Squaring x an y axis in Mach 3 | garychief | Mach Software (ArtSoft software) | 2 | 05-31-2009 08:16 AM |
| Need help configuring z axis in mach 3 | RRK | Mach Software (ArtSoft software) | 1 | 07-13-2008 06:21 PM |
| Trying 1 Axis out with Mach 2 | Scra99tch | Stepper Motors and Drives | 1 | 02-13-2007 10:08 AM |
| will mach 2 or mach 3 work for 4 axis cnc? | Runner4404spd | Mach Mill | 3 | 10-05-2005 11:44 AM |
| | |
Linear Mode
