Gecko 540 with Nema23 300-oz/in - CNCzone.com-The Largest Machinist Community on the net!

jallenmorris · #1 07-24-2010, 10:07 AM

http://cgi.ebay.com/ws/eBayISAPI.dll...=263602_263622

That is the link. Is this a good / fair / bad deal?

I don't see a power supply with this (G540 is just the controller/driver right?)

How much should I expect to spend on a power supply for this ? G540 taking up to 50VDC @ 3.5A

Thanks for any help.

ger21 · #2 07-24-2010, 10:57 AM

For $55 more, you can get bigger motors and a power supply.
http://www.kelinginc.net/CNCNEMA23G540Package.html

Or, you can get a G540 and 3-280oz motors for $366.
G540=$249 when purchased with motors
282oz stepper = $39 each

Crevice Reamer · #3 07-24-2010, 12:51 PM

I don't know what you want to drive with this. The price is exactly what you would pay Keling for a G540 and three 381s. Keling's shipping might cost less though.

This is what I recommend:
http://crevicereamer.com/Page__57.html

CR.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
48V nema23/34 servo motors	ee_t	Servo Motors and Drives	3	12-30-2009 05:54 PM
RFQ Nema 34 to Nema23 Mounts	redbaron	Employment Opportunity	4	04-29-2005 02:59 PM
Nema23 Or Nema34	FLUTE HEAD	Stepper Motors and Drives	0	07-22-2004 03:03 PM
NEMA23 steppers getting very hot	Angelos	General Electronics Discussion	4	04-02-2004 10:00 AM
Nema23 vs 34	boxwood	DIY-CNC Router Table Machines	3	08-08-2003 07:14 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)