Where to buy "just" a CNC gantry?

[microbeast29]

After making several attemps at my own build, with minimal success, I would like to know if anyone could show me where to buy just the gantry for a cnc machine, without the table and electronics? I already have steppers, drivers, a 4'x8' table, just need to gantry portion minus the router?

I have seen several plasma gantry's on ebay and torchmate, but I need one for a router, preferably designed with rack n' pinion in mind.

Any help would be appreciated, thanks!

[lovebugjunkie]

www.snbinc.ca
Might have what you are looking for, or parts to build one.

[lunchtrayrider]

http://www.ez-router.com/index.asp?P...PROD&ProdID=53

ez router sells just the gantries.

[rowbare]

Mechmates seem pretty easy to build if you get the material laser cut and bent: http://www.mechmate.com/

Check out the "Profiled (laser cut) & bent steel plate" forum in the "Common Assemblies & Parts" section

bob

[Med-Pac]

I'd check out the 80/20 guys (alum. ext) We built ours out of 3" x 6", works great. You could buy the parts from the companies that sell machines, but you'll be paying for a few middle men. Probably end up assembling it yourself anyway.

Hope that helps ya,
Mike