| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
03-31-2010, 03:12 PM
| |||
| |||
Hello all. Im new to the whole cnc world, but i'm attempting to construct my own cnc router. I am more than happy with the whole mechanical concept, but have no idea about the electrical side. Please can anybody point me in the right direction to where i can find clear advice on stepper motors/ drivers/ software etc. Additionally if any one has any advice on equipment or can give any recommendation it will be recieved with open arms. Many thanks Drewbob  :  |
|
#2
03-31-2010, 03:28 PM
| ||||
| ||||
| Hi Drewbob. Welcome to the Zone! You don't say what size router you are building, but in most cases, these would be your best bet for electronics: http://crevicereamer.com/Page__57.html CR.
__________________ http://crevicereamer.com Too many PMs. Email me to my name plus At A O L dot com. |
|
#3
10-25-2010, 12:43 AM
| |||
| |||
| hi drewbob, i am in the EXACT same situation as you. i have found plenty of information on the mechanical side, but little to none about electronics and particularly stepper motors. i will be watching this post closely to see if anyone is able to help. ill let you know if i find anything of use. jeb92 |
|
| Tags |
| drivers, mach 3, stepper motor |
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- Power Supply for 4 Stepper Driver 32-65VDC and 4 Stepper Motor 65V 2.3A | guy2b1 | DIY-CNC Router Table Machines | 16 | 03-08-2011 05:50 AM |
| Advice needed in debugging Stepper Motor | woody8750 | Stepper Motors and Drives | 11 | 12-31-2009 04:57 PM |
| Stepper controller/motor questions and advice request | Halfdone | General Electronics Discussion | 9 | 12-08-2008 05:00 PM |
| Beltdrive-stepper motor-stepper motor driver | Georg | Stepper Motors and Drives | 0 | 10-16-2007 04:56 PM |
| Advice about stepper motor | rbb_UK | Stepper Motors and Drives | 1 | 01-18-2007 12:18 PM |
| | |
Stepper motor advice!!! 
Linear Mode
