| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| DIY-CNC Router Table Machines Discuss the building of home-made CNC Router tables here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
03-19-2010, 11:01 AM
| |||
| |||
I am looking to buy some limit switches for my machine that I am nearing completion on and I found these. I am using a G540 and the recommended power supply that is rated for 48v and 7.3a. http://cgi.ebay.com/4-CNC-Limit-Swit...item3ca09fcd51 Specs say that they are rated for 4 amps at 125 volts AC. and 1/2 amp at 125 vdc. And that these can be connected normally closed or normally open via the three sets of screw lugs.  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| G540 and proximity switches | Fixittt | Gecko Drives | 30 | 04-01-2011 05:04 PM |
| Limit switches and homing switches | AeroKam | Open Source CNC Machine Designs | 16 | 01-05-2008 07:56 AM |
| The relationship of limit switches to home switches. | MikeAber | General Electronics Discussion | 4 | 11-04-2004 01:28 PM |
| Limit switches and home switches | viktorcnc | TurboCNC | 2 | 08-03-2004 06:11 AM |
| Home switches and limit switches. | ynneb | General Electronics Discussion | 5 | 04-08-2004 05:32 PM |
| | |
Linear Mode
