Newbie- Home Made CNC where to begin?

[Raj Quest]

Dear All,

I'm planning to build my own CNC PCB router.
This'll be used mainly for hobby electronic projects using SMD components,
So I'll need a fairly precise Machine.

There is soooo much here, I'm Lost, don't know where to begin.
I want to make my own Machine, and Controller.

Please! Can someone guide me to a simple and complete build thread.

Thanks,
Raj Quest

[Crevice Reamer]

Hi Raj. Welcome to the Zone!

Start with the basics:

http://crevicereamer.com/Page_2.html

CR.

[WayneHill]

Raj,

Welcome to the Zone! As you have found, there is lots of information and help avalable here. It is matter of which path to take on your journey.

Cost.
Size.
Type.

It is a good place to start.

Wayne

[DIYaholic]

Raj Quest,
Welcome to the Zone.
There are numerous builds here on the zone. You could do a search for PCB or check out DIY Router forum. Ultimately, you need to do tons of reading/research. As you do your research keep in mind what you want your machine to be capable of.
Good luck with your research.