corbels carving

[eloid]

has anyone made any 2.5 / 3d corbels with there cnc and axis setup
looking to get A axis going... like know if anyone have got that advance with there cnc setup...intersted in what software you using for cad and g code?

i have some 3d wire frame cad drawings like to know how to make solid model of them

[hemsworthlad]

Originally Posted by eloid ...intersted in what software you using for cad and g code? i have some 3d wire frame cad drawings like to know how to make solid model of them

I use Rhino which is brilliant you can download a fully usable demo thats limited to 25 saves also use Alibra which is good but not the easiest beast to learn. I also use Gmax but not so much and Bobcad V23 for toolpaths/gcode.

Regards solid model, it shouldnt be to hard if you have already got a wire frame to work from.
If your not used to solid modeling it will be abit of a learning curve but still do able in reasonable time with practice.
If your lucky it will be just a case of applying surfaces or extruding curves/faces.

If you want to email me the wire frame i will have a look for you.
I'm no expert but always get out what i want it just probably takes me longer than an expert.?